If you want to have the wall mounted bookshelves, you have to be aware of how you can install them. When you have a dry wall, you have to locate studs when you slide the electronic sensor with a dry wall and you can hear a beep or you may see the red line. This indicates the edge of the studs and you should mark such place.
If your walls are made in the wood-lath plaster walls, you should use the stud sensor with the metal settings in order to pinpoint where lath was nailed at the stud. You should then hold the standards studs and mark where there are stud edges and make the top of the screw on the place where the screw holes are found. Â There are many ways to add the wall mounted or modular shelving at your system. They may be engineering so that they may fit in different spaces and contrary to the built-ins, they may be re-installed after being disassembled when you are moving.
In many homes, the space is important and the wall mounted bookshelves are important to make sure that your books are not getting dirty, being attacked by the mildew or torn out. The book case is good to keep the books safe but at the same time they are expensive and they may take up an important floor space. The wall mounted bookshelves do save space but the books are also kept at the right height so it is easy to locate a book whenever someone wants to have it and this is without the need of bending down to see where the book is. Â You can put up the book shelves by using the standard bracket metal that may be fixed at the wall and the shelves can be adjusted easily when the new height is needed.